How to Build a Vaporizer at Home

https://www.wikihow.it/Costruire-un-Vaporizzatore-a-Casa

Vaporizers are used in place of normal smoke extraction methods to inhale all the natural vapors of the smoked substance, rather than consuming them along with the carcinogens caused by combustion.These vaporizers are usually very expensive and for this reason are out of reach of the average smoker.Luckily, you can learn how to make one using items you can commonly find at home.Read on to find out more.

Method 1

Method 1 of 3:

Using a Heat Gun

Download PDF

1
Gather what you need. Even though you will have to buy a specific tool to make a vaporizer with this method, you will still save money.A new vaporizer costs around €100-200, while the price of a heat gun is around €40;everything else you can find directly at home or at the supermarket for less than €5.To make this vaporizer, you will need:
- A heat gun that reaches a temperature of 200°C;
- The paper towel roll and a toilet paper roll of the same diameter;
- Tin foil;
- A baking bag (like the ones in the bag);
- An infuser;
- Some cable ties;
- A funnel or coffee container small enough to fit into the paper towel tube.
2
Cover the inside of the paper tubes with foil. To help you, you can roll the foil onto a pen or ruler and then unroll it into the paper tubes.Leave a little border to wrap around the outside edges of the tubes, securing them to the card.
- There are conflicting opinions about using aluminum foil at high temperatures because it could emit dangerous vapors.Some studies suggest that aluminum poisoning contributes to Alzheimer's, although this method does not allow the aluminum to dissolve or degrade.Keep this in mind if you use a vaporizer for health reasons.
The funnel should point outwards.You can use tape or glue to seal it well, before securing it with foil.
4
Secure the sachet around the spout of the funnel and secure it with zip ties. Then, fold the corners of the sachet over the zip tie and secure them with another zip tie.You have created a folded edge so that the sachet remains firmly attached to the nozzle of the heat gun.
- The sachet will contain the vapor emitted by the heated substance.You can spin the sachet;so it helps to have something to plug the hole in the sachet or you can just use your thumb.
5
Assemble the vaporizer. Now you end up with a bunch of weird stuff covered in tinfoil.Don't worry, it assembles in a snap.Point the nozzle of the heat gun upwards and fit the foil-covered toilet paper roll onto it.Put the substance to be smoked in the infuser and place it on that roll.^{[1]
X
Research source}
- Now take the other roll, the one with the paper towel with the funnel or with the coffee tank facing upwards.Place the paper towel roll on top of the other and seal it with more foil.Connect the sachet to the funnel and we are ready to go!
Turn on the heat gun — the sachet will begin to fill with steam.Even though it's sometimes hard to see it, don't worry, it's there.When the sachet deflates completely, turn off the gun and inhale the vapor that remains in the roll (there will be a lot, don't waste it).Inhale the vapor from the pouch.

Method 2

Method 2 of 3:

Vaporizer Box

Download PDF

1
Gather what you need. This is the simplest and most primitive way to make a vaporizer, it requires very few very common objects.You will need:
- A small box;
- A tealight candle that fits in the box;
- A small metal tray that can fit on the box, possibly one of the tealight holders or the cap of a can of hand cream;
- A glass large enough to cover the metal tray;
- A small rubber tube or a bendable straw.
2
Light the candle and place it in the box. Light it and make sure there is space on the sides of the box so it doesn't catch fire.
- Basically, what you need to do is put the substance you want to smoke on the tray with the candle and use the glass to collect the vapor, to inhale through the tube.It's a simple method.
Better to use a candle with a fairly low flame, so that it doesn't burn the tray.Place the substance you plan to smoke on the tray.
Get a glass large enough to fit the tray and small enough to place on the box.Wait for the steam to enter the glass.
Once the glass fills with vapor, you can begin to inhale through the rubber tube.When you're done you can dismantle it and no one will notice anything.

Method 3

Method 3 of 3:

The Bulb Vaporizer

Download PDF

1
Gather what you need. For this method you will need:
- A light bulb;
- A plastic straw;
- A 33cl bottle of Coca Cola or similar drinks;
- A knife or a pair of scissors;
- A pen;
- Glue or tape.
Think of these holes as slots for the straw to fit through.Make sure the straw is secure and no air passes through, otherwise use tape on the sides to make it stick better.Leave the other hole open.
3
Cut off the neck of the bottle using scissors. Take at least 8-10 cm of bottle.You will use this to attach the light bulb to it and it will act as a vaporization chamber.
- If you are concerned about problems related to taking Bisphenol A from smoking plastic objects, you can replace the bottle with any tube that the bulb fits into.The handle of a small metal flashlight will also work.
4
Remove the bottom of the bulb. You will need a sharp knife to work around screwing in the bulb.Usually it is best to cut in the recess between the glass part and the screw connection.Be very careful.^{[2]
X
Research source}
- After removing, be sure to discard any remaining glass pieces.It is light metal and should come off easily.After removing the metal, remove the filament and internal components of the bulb, leaving only the empty glass part.
Usually, the typical soda bottle and a normal light bulb are more or less the same size, so they should match almost perfectly.Seal them with tape.
Check that all contact points are sealed.If necessary, add a little glue or tape.
7
He smokes. To smoke, cover the empty hole with your thumb and breathe through the straw while heating the bulb with a windproof lighter;rotate it to prevent it from burning.
- As the heat begins to create steam, you will notice a sort of mist appear in the bulb.Cover the hole on the cap with your finger and inhale through the straw.
- There are conflicting opinions on whether this method of heating the bulb is safe or not.Some bulbs have a plastic coating that could release dangerous vapors, much more dangerous than those released by the substance smoked conventionally.If you plan to use a light bulb, make sure it is made of clean, clear glass, and change it often.

Warnings

Vaporizers are called "healthy" because they work with temperatures that release the active ingredient without burning organic matter;this means that combustion does not occur and therefore problems related to carcinogenic substances in smoke do not develop.This process is very difficult to control with a candle or a lighter, so much so that it invalidates the "healthy" assumptions on which this way of smoking is based.
If you need to vaporize substances for health problems, it is much safer to buy a vaporizer.There are many glass pipes that work on the same principle and cost under €40.

Things you will need

Plastic bottle (with cap)
Clear glass bulb
Adhesive tape
Straw
Lighter, preferably windproof.

Licensed under: CC-BY-SA