How to Frame a Puzzle

news Publish tags Sources about us privacy
GratisForGratis

WikiHow

https://www.wikihow.it/Incorniciare-un-Puzzle

Sometimes a puzzle you've just finished is too good to dismantle, and after working so hard to complete it, it would be disheartening to have to dismantle it.There are two possibilities:Either you buy a special puzzle frame, which is often more expensive than the puzzle itself, or you glue the pieces permanently together.
Method 1
Method 1 of 2:

Join the Pieces Using Glue

PDF download Download PDF
  1. Step 1 Utilizza questo metodo per creare una decorazione permanente da poter ammirare in ogni momento.
    If you don't intend to disassemble the puzzle, you can use a special glue to join the pieces together permanently.Doing so creates a shinier, sturdier work of art, but the value of the puzzle is significantly reduced.For this reason, this method is not recommended for vintage or valuable puzzles, and some puzzle enthusiasts do not use it at all.
  2. Step 2 Cerca una cornice che si adatti al tuo puzzle.
    Since your assembled puzzle may have slightly different dimensions than those indicated on the box, use a ruler or tape measure and measure it carefully, before choosing the appropriate frame.
    • Some hobby and craft stores sell the frames in separate pieces, which you can reassemble into rectangular structures by customizing the length and width. [1]
  3. Step 3 Scegli il materiale da cui ricavare la base di supporto del puzzle, che si adatti alla cornice.
    The support base can be poster board, a foam rubber base or a sturdier cardboard approximately 6 mm thick.Cut out a rectangle to insert into the frame.This material will constitute the support of the puzzle, the base on which it will rest, remaining fixed and flattened.We recommend using a sharp cutter to cut out the base precisely, using a square or protractor to ensure that the sides have perfectly right angles.
    • Avoid using thin cardboard or other easily bendable materials, as the puzzle could warp in the long run.
  4. Step 4 Infila un strato di carta cerata sotto il puzzle.
    Protect the surface underneath the puzzle by carefully inserting something flat and easily available, such as waxed paper.
  5. Step 5 Utilizza un mattarello per appiattire il puzzle.
    Small bumps and loose pieces can be smoothed out with a rolling pin before gluing. [2] Pass the rolling pin several times along the entire surface of the puzzle, exerting the necessary pressure.
  6. Step 6 Spargi della colla speciale sulla superficie del puzzle.
    Purchase puzzle glue at a craft store or online.Use a brush to apply this glue to the surface of the puzzle, covering the entire surface with a thin layer.Pay particular attention to the gaps between the pieces.
    • If the puzzle glue is powdered, read the instructions to find out how to prepare it.
  7. Step 7 Aspetta che la colla si asciughi.
    The glue pot may say how long it takes for the glue to dry.If there are no directions, let it dry for at least 2 hours. [3] Test to see if the puzzle is ready by gently lifting one end.If the pieces are still loose or coming loose, wait longer or apply more glue.
  8. Step 8 Incolla il puzzle sulla base di supporto.
    Apply glue to the surface of the cardboard or foam base you cut out earlier.Carefully transfer the glued puzzle to the support base, aligning it with the edges.Gently pressing down, insert it into the base, then wipe off any excess glue that comes out between the puzzle and its base.
    • If the glue doesn't hold or doesn't look uniform, contact a craft store and have your puzzle professionally "dry" assembled onto the stand.
  9. Step 9 Lascia asciugare il puzzle per almeno 24 ore, mettendogli sopra qualcosa di pesante, se necessario.
    Do not touch the puzzle for at least a whole day, so that the glue reaches maximum strength.If the puzzle seems to be bowing or is not perfectly level, place a large book or other heavy object on it that has a larger surface area than the puzzle. [4]
    • Do not use small objects or objects with an irregular surface, as they could compress the puzzle, deform it and could even damage it.
  10. Step 10 Incornicia il puzzle.
    Once the puzzle and its support base have dried, insert them into the frame.Secure it using the tabs or arms on the back, or any other system on the frame.
    • Optionally, install a glass or hard plastic cover over the puzzle to prevent scratches.For better color preservation, use an ultraviolet-resistant glass cover.[5]
    Advertising
Method 2
Method 2 of 2:

Display a Puzzle Without Using Glue

PDF download Download PDF
  1. Step 1 Misura la lunghezza e la larghezza del puzzle.
    Enthusiasts who want to preserve the usability and value of the puzzle, without giving up on displaying it, use a special frame.Usually these frames have different sizes, depending on the size of the puzzle (500, 1000 pieces etc.), but for greater accuracy it is recommended to measure the width and length of the puzzle and buy one that fits perfectly.Since the frame will be the only way to hold the puzzle in place, it is important to buy one that conforms to the puzzle as much as possible and holds it securely.
  2. Step 2 Scegli una cornice per puzzle che non richieda l'utilizzo di colla.
    Some frames, called "puzzle frames", are actually ordinary frames made to frame regular puzzles, and require the use of glue.Instead you need a special frame, which often costs more.You can also try using a normal frame with a very solid front and back, but it is recommended to look for a puzzle-specific one, because these types of objects are thicker and more fragile than the photographs and posters we usually put in frames.
    • Try an aluminum frame, one with a glass front MyPhotoPuzzle frames, a wooden or acrylic Jigframe, or one of those with adjustable dimensions Versaframe.
    • Note: there are a couple of cheaper options for displaying your puzzle, as you'll see at the end of this section.
  3. Step 3 Monta una cornice MyPhotoPuzzle.
    The exact design of a puzzle frame varies from one brand to another.For MyPhotoPuzzle frames, gently press the glass onto the puzzle surface, flip the glass and puzzle together face down, then place the support base on the back of the puzzle.Make sure that one of the hooks on the support base is at the top of the puzzle, so as not to mount it upside down.Place the frame on top of the base and the glass;then, using all the hooks on the edges of the base, secure it to the frame.[6]
  4. Step 4 Monta una cornice di legno Jigframe per puzzle.
    The frame comes with an acrylic plastic sheet, protected with paper on both sides.Warm the paper briefly in the sun or near a heater, if necessary, so that it is easier to peel the paper.Slide or build the puzzle on top of one of the included sheets.Open and slide the frame slide, place the puzzle sheet face up on the slide, then cover the puzzle with the acrylic sheet and slide it back into the frame.
    • Instead of sliding the puzzle, you can use one of the included sheets, placing it on top of the puzzle to hold it in place while you flip it over, then place another sheet on the back of the puzzle and flip it face up again.
    • If the puzzle is much smaller than the frame, you can place a small piece of cardboard under the bottom edge of the puzzle, which you will place in the center.
  5. Step 5 Per montare gli altri tipi di cornice, segui le istruzioni incluse nella confezione.
    Other brands may use a different system than those described above.An adjustable frame can be sold in two pieces, which are slid together onto the puzzle and fixed in the correct position.
  6. Step 6 In alternativa, puoi esporre il tuo puzzle sotto il vetro di un tavolino da caffè.
    Some of these coffee tables have a glass plate that can be assembled and disassembled from the main body.If you want to make your puzzle visible, place it under the plate.
  7. Step 7 Usa un raccoglitore di plastica trasparente.
    Usually these bags are made of polypropylene, a material that protects the puzzle from humidity or other possible damage.These plastic bags are mostly used for storing prints and photographs, so it may be difficult to find them that are the right size to hold a medium or large puzzle.
    Advertising

Advice

  • If the pieces of the puzzle still move after being glued the first time, apply a second layer of glue, carefully placing it also in the gaps between the pieces.
Advertising

Warnings

  • Always take and move the puzzle very carefully, even if you have already glued it.
Advertising

Things you will need

  • Puzzle
  • Cornice
  • Puzzle glue
  • Support base
  • Cutter
  • Bracket (optional)
Licensed under: CC-BY-SA
CAPTCHA

Discover the site GratisForGratis

advertising

 

^