How to Make a Smoking Tool From Scratch

https://www.wikihow.it/Realizzare-uno-Strumento-per-Fumare-Partendo-da-Zero

05-09-2024 |
italia |
fai da te |

It's Friday night and a friend just gave you something you can smoke.You turn on the TV, relax and - WHAT?Nothing you can smoke with?Well, don't worry, buddy.You've come to the right place.

Steps

Download PDF

1
Ask yourself why a smoking contraption is needed. Why do humans build them?Well, obviously to have a means through which to burn what needs to be burned, and to be able to inhale the smoke.
1. The stove.This is the essence of such a tool.This is what allows you to concentrate the substance to be smoked in a single point.
2. The ventilation duct.It's what keeps you from getting burned:the smoke passes through it and cools a little.
2
Make the different contraptions. Now that I have all this information, what do I do with it?
1. Bongos.A lot of people prefer them.They cool the smoke a lot and give you a good effect, without having to force the bowl to cool down.
2. Pipes.These are usually held in your hand while you are moving.For now you can make one very quickly!
3
Let's get started! Do you have everything you need to make one of these two items?Look around, your house is a mine!
1. With aluminum foil* you can create a disposable pipe
  1. Squeeze a cylinder of foil around a pencil, or anything else to create the vent.Don't forget to leave extra space at the end for the fire bowl.All you have to do is take out the pencil to make the tube shape.You need to prevent the smoking substance from passing through it (so it doesn't burn).Then, squeeze the vent just above the bowl, but make sure you can still smoke through it!
2. Apples.Natural braziers.A healthy alternative!
  1. All you have to do is remove the pistil and drill a hole there straight from the bottom up, but not all the way down.Now create a space near the first hole that acts as a relief valve for excess smoke.Make the hole to vacuum from.Obtain it at an angle of about 90 degrees compared to the first.Now put the substance to be smoked on top, cover the vent valve and turn on.
3. Quills.All you have is a pen?It sucks, but many of us have been there.
  1. All you have to do is disassemble the pen so that you only have the outer casing.Now you need a filter so you don't inhale the substance you want to smoke.You can use either a little aluminum foil* if you have some, or you can get some from the sink.Yes, there is a filter in every sink if you stick your finger in the faucet and pull it out.All you have to do now is push the filter into the pen, then put your smoking substance in and light up.The pen heats up very quickly, so be careful!
4. Bongos.Oh, so you want to get high, huh?You'll need a couple of things, but a bongo is the best tool for this.
  1. Now go out and get a bottle (a plastic one is fine), a concave bowl (or make a brazier out of foil) and a pen (just the outer casing, after removing the inside).First of all, the fire pit.Once you have that, you need a filter to place at the bottom, so go to the sink and get the filter, or make one out of aluminum foil*.Drill a hole through the bottle cap and push the pen into it (make sure it is stable).Use duct tape or duct tape to attach it securely.Then, take another photo somewhere around the top, stick the pen in (well secured, as before) and secure it with tape.Now make a hole on the opposite side to act as a relief valve.That's it!
  2. Bonus points if it has style!If you run a small tube or something from the bowl over the cap to the bottom of the bottle (don't forget to secure everything tightly), then you've made a water bongo!All you have to do now is add some water to the bottom!
Enjoy tobacco or other legal stuff!