How to Remove the Safety Band from a Bic Lighter

There is also a simpler and more efficient solution to the problem than the technique described above (although it depends on the brand of lighter you use).

1. 
   1
   Simply take a fork and insert a side prong between the two wheels and force it upwards. (You can also use another thin object such as a small screwdriver or a sturdy paper clip;it all depends on the brand of the lighter.For Bic, a fork is just fine.) This way you force the safety band out of its housing, although, to never forget safety, remember that it could suddenly pop off and could hit you in the eye. (Use safety glasses.)
2. 
   2
   At this point you just need to use thin pliers or your fingers to completely remove the band. This technique saves you from having to rearrange the fins, which could scratch your thumb even after they're flattened.However, if necessary, use a flat, rigid tool, such as a screwdriver.You can also press the flaps against the edge of the table.
   Advertising

This is perhaps the simplest method of all.Here's how to do it.

1. 
   1
   Open a pocket knife and hold it to the side, under the band and above the wheel.
2. 
   2
   Pry and observe: usually the band comes off cleanly.It may be helpful to point the lighter downwards.This method usually leaves the flaps intact and you won't have to fold them inward if you perform the movement correctly.It might take a couple of tries, but it should make you look like a "cool" guy.
   Advertising